Cerca prodotto

Cerca

Briciole di pane



Labelmate CAT-3

  • Avvolgitori
  • Accessori
  • Product Info
Labelmate CAT-3

CAT-3-STANDARD

Codice: LMR004
Info ▼
€ 682,00 (Prezzo di listino)
The Industry Standard Heavy-duty Label Rewinder. 76mm standard.* Size: W x D x H: 300 x 350 x 320 mm. Label Width: 155mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-ACH

Codice: LMR005
Info ▼
€ 744,00 (Prezzo di listino)
CAT-3 with an Adjustable Core Holder for any core size from 25 to 101mm in diameter. With inner flange. Use APG-CAT if you wish to also guide the outer edge of your label. Size: W x D x H: 280 x 310 x 310 mm. Label Width: 155mm. Roll Diam: 280mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-CHUCK

Codice: LMR006
Info ▼
€ 892,00 (Prezzo di listino)
The industry standard Heavy-duty Label Rewinder with an easy-loading Quick-Chuck. Ideal for production work. 76mm standard.* Size: W x D x H: 300 x 385 x 320 mm. Label Width: 170mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-10-INCHES

Codice: LMR007
Info ▼
€ 756,00 (Prezzo di listino)
CAT-3 for labels up to 255mm wide. 76mm standard; 38, 40, 44 or 70mm on request. Size: W x D x H: 300 x 455 x 320 mm. Label Width: 255mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-1-INCH

Codice: LMR008
Info ▼
€ 682,00 (Prezzo di listino)
CAT-3 for 25.4mm diameter cores. Size: W x D x H: 220 x 350 x 280 mm. Label Width: 155mm. Roll Diam: 220mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-40G

Codice: LMR009
Info ▼
€ 1.250,00 (Prezzo di listino)
Gear motor driven. Tight rewind up to 400mm. 76mm Quick-Chuck standard.* Size: W x D x H: 400 x 450 x 460 mm. Label Width: 170mm. Roll Diam: 400mm. Speed: 38cm/sec.
Labelmate CAT-3

CAT-3-TA-STANDARD

Codice: LMR010
Info ▼
€ 832,00 (Prezzo di listino)
Same features as CAT-3-STANDARD but with Tension Arm. Label Width: 155mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-TA-ACH

Codice: LMR011
Info ▼
€ 894,00 (Prezzo di listino)
Same features as CAT-3-ACH but with Tension Arm. Label Width: 155mm. Roll Diam: 280mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-TA-CHUCK

Codice: LMR012
Info ▼
€ 1.042,00 (Prezzo di listino)
Same features as CAT-3-CHUCK but with Tension Arm. Label Width: 170mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-TA-10-INCHES

Codice: LMR013
Info ▼
€ 906,00 (Prezzo di listino)
Same features as CAT-3-10-INCHES but with Tension Arm. Label Width: 255mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-3-TA-1-INCH

Codice: LMR014
Info ▼
€ 832,00 (Prezzo di listino)
Same features as CAT-3-1-INCH but with Tension Arm. Label Width: 155mm. Roll Diam: 220mm. Speed: 125cm/sec.
Labelmate CAT-3

CAT-40G-TA

Codice: LMR015
Info ▼
€ 1.400,00 (Prezzo di listino)
Same features as CAT-40G but with Tension Arm. Label Width: 170mm. Roll Diam: 400mm. Speed: 38cm/sec.
Labelmate CAT-3

Optional Adjustable Paper Guide

Codice: LMX444
Info ▼
€ 34,00 (Prezzo di listino)
Optional Adjustable Paper Guide For CAT-(TA)-ACH or CAT-(TA)-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.
Labelmate CAT-3

Internal flange

Codice: LMX489
Info ▼
€ 30,00 (Prezzo di listino)
Internal flange for CAT-(TA)-STANDARD and CAT-(TA)-10-INCHES (also for TA models). Diam. 300 mm.
Labelmate CAT-3

External flange

Codice: LMX490
Info ▼
€ 30,00 (Prezzo di listino)
External flange for CAT-(TA)-STANDARD and CAT-(TA)-10-INCHES (also for TA models). Diam. 300 mm.
Labelmate CAT-3

Standard shaft

Codice: LMX491
Info ▼
€ 106,00 (Prezzo di listino)
Standard shaft for CAT-(TA) with vanes, internal and external flanges. Label width: 155mm
Labelmate CAT-3

10-Inches shaft for CAT

Codice: LMX492
Info ▼
€ 138,00 (Prezzo di listino)
10-Inches shaft for CAT (-TA) with vanes, internal and external flanges. Label width: 255mm
Labelmate CAT-3

Adjustable Core Holder

Codice: LMX500
Info ▼
€ 145,00 (Prezzo di listino)
ACH-CAT. Adjustable Core Holder for any core size from 25 to 101mm in diameter. With inner flange. Label width: 155mm
Labelmate CAT-3

Bail Standard

Codice: LMX501
Info ▼
€ 15,00 (Prezzo di listino)
For rewind on shaft, no core is needed.
Labelmate CAT-3

Bail 10’

Codice: LMX502
Info ▼
€ 18,00 (Prezzo di listino)
For rewind on shaft on CAT-(TA)-10-INCHES, no core is needed.
Labelmate CAT-3

Foot Switch

Codice: LMX472
Info ▼
€ 80,00 (Prezzo di listino)
Foot Switch to start and stop the TWIN-CAT-2, CAT-4, CAT-3 or MC Rewinders.
Labelmate CAT-3

1’ Shaft

Codice: LMX546
Info ▼
€ 106,00 (Prezzo di listino)
1-Inches Shaft for CAT (-TA) with vane, internal and external flanges. Label width: 155mm
Labelmate CAT-3

Low Torque Option

Codice: LMX503
Info ▼
€ 50,00 (Prezzo di listino)
Low Torque Option. For tension sensitive printers. Factory installed. Not for CAT-4.
Labelmate CAT-3

220-240V - 50Hz DC Power Supply

Codice: LMX537
Info ▼
€ 40,00 (Prezzo di listino)
220-240V - 50Hz DC Power Supply for CAT. Output: 15V - 3A. Included with CAT Rewinders.

Caratteristiche tecniche

LABELMATE’s Constant Adjustable TorqueTM (“CAT”) technology has made the silent, easy-to-use CAT-3 the “Industry Standard” Label Rewinder. There are no awkward troublesome belts or clutches.The CAT-3-STANDARD handles labels up to 155 mm wide and will wind a roll of labels up to a 300 mm diameter. Torque and Direction are fully controllable from the Control Panel. Dual torque ranges provide plenty of power for use with a LABELMATE Slitter, too.

For wider labels up to 255 mm, choose the CAT-3-10”.Model CAT-3-ACH includes an Adjustable Core Holder that accepts any core size from 25 mm to 101 mm in diameter and up to 155 mm in width.The optional Adjustable Paper Guide APG-CAT with movable arm can be installed in minutes on the base plate of the CAT-3-ACH or CHUCK. This inexpensive accessory guides the outer edge of the label roll as it’s being rewound to ensure even roll alignment.The CAT-3-CHUCK includes LABELMATE’s durable “Quick-Chuck”TM quick-locking Core Chuck, permitting the fastest loading and unloading of cores and label rolls.The CAT-3-CHUCK is ideal for label slitting applications, high-volume production environments, or anywhere the ultimate convenience in Rewinders is desired. The CAT-3-CHUCK is available for 38-,40-,44-, 50, 70, 76- and 100 mm cores. The CAT-3 handles any rewind job and with its “HIGH” torque range can also power the LABELMATE S-100 or S-200 Label Slitters.The CAT-40G is gear motor driven for more torque. It accepts bigger rolls with a diameter up to 400 mm. It is equipped with the LABELMATE “Quick-Chuck”tm quick-locking Core Chuck.

Please note that if to be placed after a print, you need the CAT-40G-TA.The CAT-3-TA Heavy-Duty Label RewindersThe CAT-3-TA is a CAT-3 with tension arm specially engineered for applications that require fixed web tension. The TA is available for all models of CAT-3.IMPORTANT NOTE: The CAT-3-TA can be also be used as a regular CAT-3 with the same features.Rugged, heavy-gauge steel construction allows your CAT-3 / CAT-3-TA Rewinder to be simply set in place. Special anti-slip feet keep the unit from moving.

Reliable, high quality and maintenance-free, the Heavy-Duty CAT-3 / CAT-3-TA Label Rewinders feature a 5-Year Parts and Labour Limited Warranty, the longest in the industry. (The Warranty Period for included Power Supplies is 1-Year).Put LABELMATE CAT-3 / CAT-3-TA Label Rewinders to work for you today and enjoy a new dimension in label rewinding convenience and reliability. Custom colours, badging, and special core holders are available for private label applications.

MAXIMUM LABEL ROLL WEIGHT:
STANDARD: 8Kg.
ACH: 7Kg.
10-INCHES: 10Kg.
CHUCK: 8Kg.
CAT-40G: 14Kg.

Contattaci
 

Multimac Srl  -   800 593 293  -   info@multimac.it  -   P.Iva 01281830289  -   Company info  -   Privacy  -   Sitemap  -   Copyright © 2019. All rights reserved.

Login

Per poter acquistare i prodotti su multimac.it è necessario accedere con la propria email e password.

Accedi

Password dimenticata?
Non possiedi i dati di accesso? Registrati

Chiudi

Richiesta prezzo speciale
per progetto

» Leggi l'informativa sulla privacy Invia richiesta
Chiudi