Thermal Printing

Thermal Printing Vedi di piùVedi di meno

Labelmate CAT-4

  • Avvolgitori
  • Accessori
  • Product Info
Labelmate CAT-4

CAT-4-STANDARD

Codice: LMR025
Info ▼
€ 705,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Heavy-duty Label Rewinder. 76mm standard.* Size: W x D x H: 300 x 350 x 320 mm. Label Width: 155mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-4

CAT-4-ACH

Codice: LMR026
Info ▼
€ 767,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
CAT-4 with an Adjustable Core Holder for any core size from 25 to 101mm in diameter. With inner flange. Use APG-CAT if you wish to also guide the outer edge of your label. Size: W x D x H: 280 x 310 x 310 mm. Label Width: 155mm. Roll Diam: 280mm. Speed: 125cm/sec.
Labelmate CAT-4

CAT-4-CHUCK

Codice: LMR027
Info ▼
€ 915,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Heavy-duty Label Rewinder with an easy-loading Quick-Chuck. Ideal for production work. 76mm standard.* Size: W x D x H: 300 x 385 x 320 mm. Label Width: 170mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-4

CAT-4-10-INCHES

Codice: LMR028
Info ▼
€ 779,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
CAT-4 for labels up to 255mm wide. 76mm standard; 38, 40, 44 or 70mm on request. Size: W x D x H: 300 x 455 x 320 mm. Label Width: 255mm. Roll Diam: 300mm. Speed: 125cm/sec.
Labelmate CAT-4

CAT-4-1-INCH

Codice: LMR029
Info ▼
€ 705,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
CAT-4 for 25.4mm diameter cores. Size: W x D x H: 220 x 350 x 280 mm. Label Width: 155mm. Roll Diam: 220mm. Speed: 125cm/sec.
Labelmate CAT-4

Optional Adjustable Paper Guide

Codice: LMX444
Info ▼
€ 34,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Optional Adjustable Paper Guide For CAT-(TA)-ACH or CAT-(TA)-CHUCK. Guides the outer edge of the label web to ensure an even roll edge.
Labelmate CAT-4

Internal flange

Codice: LMX489
Info ▼
€ 30,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Internal flange for CAT-(TA)-STANDARD and CAT-(TA)-10-INCHES (also for TA models). Diam. 300 mm.
Labelmate CAT-4

External flange

Codice: LMX490
Info ▼
€ 30,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
External flange for CAT-(TA)-STANDARD and CAT-(TA)-10-INCHES (also for TA models). Diam. 300 mm.
Labelmate CAT-4

Standard shaft

Codice: LMX491
Info ▼
€ 106,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Standard shaft for CAT-(TA) with vanes, internal and external flanges. Label width: 155mm
Labelmate CAT-4

10-Inches shaft for CAT

Codice: LMX492
Info ▼
€ 138,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
10-Inches shaft for CAT (-TA) with vanes, internal and external flanges. Label width: 255mm
Labelmate CAT-4

Adjustable Core Holder

Codice: LMX500
Info ▼
€ 145,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
ACH-CAT. Adjustable Core Holder for any core size from 25 to 101mm in diameter. With inner flange. Label width: 155mm
Labelmate CAT-4

Bail Standard

Codice: LMX501
Info ▼
€ 15,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
For rewind on shaft, no core is needed.
Labelmate CAT-4

Bail 10’

Codice: LMX502
Info ▼
€ 18,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
For rewind on shaft on CAT-(TA)-10-INCHES, no core is needed.
Labelmate CAT-4

Optional Adjustable Start Delay

Codice: LMX541
Info ▼
€ 25,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Optional Adjustable Start Delay to allow back-feed without resistance. Only for CAT-4.
Labelmate CAT-4

Foot Switch

Codice: LMX472
Info ▼
€ 80,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
Foot Switch to start and stop the TWIN-CAT-2, CAT-4, CAT-3 or MC Rewinders.
Labelmate CAT-4

220-240V 50Hz DC Power Supply

Codice: LMX537
Info ▼
€ 40,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
220-240V 50Hz DC Power Supply for CAT. Output: 15V 3A. Included with CAT Rewinders.
Labelmate CAT-4

1’ Shaft

Codice: LMX546
Info ▼
€ 106,00
Richiedi preventivo per grandi quantità Aggiungi al carrello
1-Inches Shaft for CAT (-TA) with vane, internal and external flanges. Label width: 155mm

Caratteristiche tecniche

Created to extend the capabilities of our heavy-duty rewinder range, the CAT-4 is now our most performant revinwder.

Unlike the CAT-3, the CAT-4 offers 4 inputs signals (where the CAT-3 only offers one) allowing the rewinder to be controlled by the printer through the external control input. This versatile control input will accept open collector or voltage 4 to 10V max., high or low active, jumper selected on main board. The connection is made using a 3.5mm mono jack.

An optional Adjustable Start Delay  allows the printer to execute back-feed without resistance from the rewinder.

The CAT-4 has a 3-position torque switch (compared to 2 on the CAT-3). Together with the speed adjustment, it allows the user to control the tightness of the rewound rolls. The absence of a tension arm allows better rewound rolls and increases the overall reliability of the rewinder.

For applications where the tension arm is required, the CAT-3-TA will be recommended.

The CAT-4-STANDARD handles labels up to 155 mm wide and will wind a roll of labels up to a 300 mm diameter. Torque and Direction are fully controllable from the Control Panel. Triple torque ranges provide plenty of power for use with a LABELMATE Slitter, too.

For wider labels up to 255 mm (10”), choose the CAT-4-10-INCHES.

Model CAT-4-ACH includes an Adjustable Core Holder that accepts any core size from 25 mm to 101 mm in diameter and up to 155 mm in width

The optional Adjustable Paper Guide APG-CAT with movable arm can be installed in minutes on the base of the CAT-4-ACH or CHUCK.

The CAT-4-CHUCK includes LABELMATE’s durable “Quick-Chuck”tm quick-locking Core Chuck, permitting the fastest loading and unloading of cores and label rolls. The CAT-4-CHUCK is ideal for label slitting applications, high-volume production environments, or anywhere the ultimate convenience in Rewinders is desired. The CAT-4-CHUCK is available for 38-, 40-, 44-, 70, 76- and 100 mm cores.
Reliable, high quality and maintenance-free, the Heavy-Duty CAT-4 Label Rewinders feature a 5-Year Parts and Labour Limited Warranty, the longest in the industry. (The Warranty Period for included Power Supplies is 1-Year).

MAXIMUM LABEL ROLL WEIGHT:
STANDARD: 8Kg.
ACH: 7Kg.
10-INCHES: 10Kg.
CHUCK: 8Kg.

Contattaci
 

Multimac Srl  -   800 593 293  -   info@multimac.it  -   P.Iva 01281830289  -   Company info  -   Privacy  -   Sitemap  -   Copyright © 2019. All rights reserved.

Login

Per poter acquistare i prodotti sul nostro sito è necessario accedere con la propria email e password.

Accedi

Password dimenticata?
Non possiedi i dati di accesso? Registrati

Chiudi

Richiesta prezzo speciale
per progetto

» Leggi l'informativa sulla privacy Invia richiesta
Chiudi